HT Fine Chemical Co., Ltd.
textile-auxiliaries-chemicals-manufacturer
Dyeing Accelerator RD-100

Dyeing Accelerator RD-100

[Brief information]

This company produces the guide dye is accelerating agent which is in strict accordance with the technical standard manufacturing is used in the polyester fiber, cotton, spun rayon blended dyeing and bleaching process of high efficiency dyeing assistant. It has a swelling fiber, disperse dye, permeate, leveling dyeing effect, can improve fiber swelling property and the speed of dye internal diffusion to fiber, improve the dyeing rate, reduce the residual bath, and will not damage Sunlight-resistant fastness..

[Main composition]
Special polyion compound

[General properties]

Appearance: brown transparent liquid
Ionicity: anion/nonionic
pH: 5-7
Solubility: soluble in water

[Product features]

In the use of disperse dyes on polyester fiber dyed, can improve the degree of dyeing. The emulsion is stable, not easy specking. High leveling dye, and does not affect the fastness. This product is easy to remove through hot water treatment process, guide stain as carrier, can puffed in the dyeing process of polyester fiber, at the same time, and gradually put dye to fiber, and with the continuation of dyeing time play better role. First of all, in 40 ~ 70 ℃, heating speed control in 1 ℃ / 1.5 ~ 2 min. With 45 ~ 60 ℃ temperature, and in 70 ℃ heat preservation 20 ~ 30 min, in order to make carrier to play its full role. Dyeing temperature reached 80 ℃, polyester fiber into the glass transition temperature, dyeing don't need carrier. Secondly, carrier method dyeing polyester heat preservation time more extend than the high temperature and high pressure method 1/3 to 1/2 (color from shallow to deep). Practice has proved, only in this way, can let disperse dye in has fully puffed of polyester, has more dyeing opportunity, at the same time, still can make many kinds of dyes increased migration rate, reduce mutual contamination phenomenon, improve the disperse dye absorption rate. Finally, to take off the carrier is very important. Must use warm water, cold water fully cleaning, try to reduce the residual? When cleaning, can add dispersion chelating agent 0.5 ~ 2 g/L which has better performance, not only improve the cleaning water quality, still can make the peculiar smell get the further disperse, dissolved in water and discharge off.

[Application]

First of all, in 40 ~ 70 ℃, heating speed control in 1 ℃ / 1.5 ~ 2 min. With 45 ~ 60 ℃ temperature, and in 70 ℃ heat preservation 20 ~ 30 min, in order to make carrier to play its full role. Dyeing temperature reached 80 ℃, polyester fiber into the glass transition temperature, dyeing don't need carrier. Secondly, carrier method dyeing polyester heat preservation time more extend than the high temperature and high pressure method 1/3 to 1/2 (color from shallow to deep). Practice has proved, only in this way, can let disperse dye in has fully puffed of polyester, has more dyeing opportunity, at the same time, still can make many kinds of dyes increased migration rate, reduce mutual contamination phenomenon, improve the disperse dye absorption rate. Use in the jig dyeing machine, should be in the blank bath to add disperse dye low temperature Dyeing accelerant, running 4 rounds, and add other additives and dye. Finally, to take off the carrier is very important. Must use warm water, cold water fully cleaning, try to reduce the residual? When cleaning, can add dispersion chelating agent 0.5 ~ 2 g/L which has better performance, not only improve the cleaning water quality, still can make the peculiar smell get the further disperse, dissolved in water and discharge off.

[Usage]

After add water to emulsify Dyeing accelerant, then add to the dye VAT, after stir five to ten minutes fully diluted, then successively join the dyes and additives to bath, adjust PH value for 5 ~ 5.5, then heating to dyeing temperature, heat preservation to dyeing process completed, cooling, eliminate dye solution, use cold water washing, then through reduction washing and drying, can remove residual Dyeing accelerant easily. Usage: must according to the color and lustre of dyeing requirement, dosage and depth of color is proportional, its dosage general between in 0.5 ~ 2.5 g/L.

[Packaging and storage]
125 kg/ polyethylene drum, seal save in a cool and dry place, quality guarantee period 6 months.

Leave a Message Email Us

we will contact you within 24 hours.

Related Chemicals
  • Acid Reduction Cleaning Powder

    Acid Reduction Cleaning Powder

    June 9, 2017Textile auxiliary chemical acid reduction cleaning powder is one type of brand-new reduction cleaning agent for polyester.There are two types of Acid reduction cleaning powder agent for polyesterview
  • Expanding Agent P100

    Expanding Agent P100

    February 9, 2017Expanding agent has excellent expanding to polyester fibres while accelerates dyestuffs migrating into polyester fibres that achieves dyeing at 100℃ with blends of polyester and other fibres.view
  • Strong Oil Removing Agent H05

    Strong Oil Removing Agent H05

    February 8, 2017Strong oil removing agent mainly use in oil removal and refining of polyester, nylon and other fiber. Also in bath with dyeing .view
  • Fixing Agent for Polyester DG-1

    Fixing Agent for Polyester DG-1

    February 9, 2017To prevent the dyeing fabric deformation, most synthetic fiber before dyeing should prior to finalize the design (temperature 193 ℃ ~ 200 ℃). But because of the oxygen in air under the light catalys...view
  • Alkali Deweighting Accelerator Q-12

    Alkali Deweighting Accelerator Q-12

    February 8, 2017Special cationic active agent, Suitable to all alkali-minimization accelerant of polyester fiber and achieved energy-efficient and complied to environment protection requirement.view
Pretreatment Auxiliaries
Dyeing Auxiliaries
Hand Feels Finishing Agent
Contact