HT Fine Chemical Co., Ltd.
textile-auxiliaries-chemicals-manufacturer
Wet Rubbing Fastness Improving Agent HT-826

Wet Rubbing Fastness Improving Agent HT-826

Brief information
-- Original wet rubbing fastness improving agent is poor deep dyeing for direct, reactive,indigo blue and sulfur dyestuffs, especially for dark black, bright red and turquoise blue whose wet rubbing fastness is below Grade 1, while fabric wet rubbing fastness exported to Europe and US must be above Grade 3. Therefore, our company specially developed environment-friendly wet rubbing fastness improving agent 826 that improve the product stability of salt & alkali and reduce the structure insufficient of the product.

Main composition
-- Special water-based polyurethane.

General properties
-- Appearance: light yellow to yellow liquid (darker as time going)
-- Ionicity: weakly cationic
-- pH: 4.0±0.5 (50g/L)
-- Solubility: easily soluble in normal water in any proportion at room temperature

Properties and fields of application
--Free of formaldehyde and APEO that belongs to environmental products and complies with EU  
OEKO-TEX Standard 100 requirements.
--Use for fixing after cellulose fiber dyeing .Excellent wet rubbing fastness improving performance that can meet above Grade 3 by improving 1- 2 grades .
--Easy operation for using by direct dilution.
--Soft hand feeling, no influence on light fastness and resistant to washing.

Application
Based on different kind and concentration of dyes, different kind and pattern of treated fabric, Dosage as below:
--Dipping (washing factory only)
HT-826:  3-6% (o.w.f.) (Adjustment base on color)
Bath ratio: 1: 10 – 20
Dyed fabrics (pH ≦ 7) → Dipping (at room temperature × 20 – 30 min)→Dry
-- Padding:
HT-826:30 – 50 g/L
Dyed fabrics (pH ≦7) → One dip & pad with water retention 80 – 85% → Dry

Notice:
-- Prepared solution should be used immediately.Please test before using.The above process is for reference only.
-- Can be used with silicone oil in the same bath, but can not use with anionic agent.
-- The working liquid can achieve the best performance at 25-35℃. 
-- Please clean up the alkali (pH ≦7), salt and soaping agent of the fabric before using wet rubbing fastness improving agent 826.
-- Please clear away foaming or groove and change the working liquid because it will have a lot of foam when it use for a long time.
-- Make sure pH ≦5.5 as possible.
-- The water used for working fluid should be tap water and ≤ 100ppm.

Packing and storage
-- Packing: 125 kg/polyethylene drum
-- Storage: Keep it cool and dry, 6 months in sealed container at room temperature

Leave a Message Email Us

we will contact you within 24 hours.

Related Chemicals
  • Hydrophilic Silicone Oil HT-38A

    Hydrophilic Silicone Oil HT-38A

    June 12, 2018Brief information--It is a high-grade soft finishing agent with excellent hydrophilicity. --At room temperature, it is quite stable in acidic and alkaline conditions.--When pH is lower than 8, it give...view
  • Fixing Agent for Polyester DG-1

    Fixing Agent for Polyester DG-1

    February 9, 2017To prevent the dyeing fabric deformation, most synthetic fiber before dyeing should prior to finalize the design (temperature 193 ℃ ~ 200 ℃). But because of the oxygen in air under the light catalys...view
  • Levelling powder for Reactive dyeing for cotton HT-68

    Levelling powder for Reactive dyeing for cotton HT-68

    June 30, 2020Main compositionSpecial high polymer compoundsGeneral properties-- Appearance: Dark brown powder-- Ionicity: anionic-- Solubility: easily soluble in normal water-- Stability: stable to alkali and elec...view
  • Soluble Silicone Oil 3012

    Soluble Silicone Oil 3012

    February 10, 2017This product has soft and smooth handle, give excellent fabric of hydrophilicity, antistatic property and anti fouling resistance, greatly improve the fabric performance, especially suitable for polye...view
  • Sulfur Dye Fixing Agent HT-LG26

    Sulfur Dye Fixing Agent HT-LG26

    June 6, 2017【Brief information 】Sulfur dye fixing agent is a formaldehyde-free fixing agent, mainly used in post-treatment of vulcanized dye fabrics and obviously all fabrics’ fastness.【Main composition】--Po...view
Pretreatment Auxiliaries
Dyeing Auxiliaries
Hand Feels Finishing Agent
Contact